ü
AWWA C901 & C906
ü
NSF Potable Water
ü
Fittings available in standard or custom design
ü
Iron Pipe Size (IPS) & Ductile Iron Pipe Size (DIPS)
ü
DR6 – 32.5 (300psi – 50psi) sizes vary
ü
HDPE fittings available in molded & fabricated design (sizes vary)
ü
Specifications & drawings on specific fittings available upon request
Potable Water: HDPE Ball Valves
Ø
Backing Rings: ductile iron
epoxy coated
316SS
polypropylene encapsulated DI
Ø
Caps: pressure & non-pressure rated
Ø
Elbows: 11-1/4° 22-1/2° 30° 45° 67-1/2° 90°
Long or Short radius
Ø
Flange adapters:
Ø
Reducers: concentric & eccentric
Ø
Water stops: non-structural
Ø
Wall anchors: structural thrust restraint
Ø
Gaskets: full face red rubber & neoprene
Ø
Compression fittings: 1” – 4” CTS & IPS
Ø
Tees: standard & reducing
Ø
Wyes: standard & reducing
Ø
HDPE blind flanges: low pressure
Ø
Butterfly valve spacers:
Ø
Crosses: pressure & non-pressure
Ø
HDPE ball valves: full port, 160 psi rated
Irrigation: 48” Tee
Ø
Electrofusion: Couplings: ½” CTS – 24” DIPS
Tapping tees:
Branch saddles:
MJ Adapters
Flex Restraints
Ø
Transition designs: HDPE X PVC
HDPE X ductile iron
HDPE X steel butt weld
HDPE X male or female pipe thread
HDPE X cut groove
HDPE X flange
HDPE X gas riser
Transition materials: Carbon steel
Aluminum bronze
304SS & 316SS
Ø
Horizontal Directional Drilling (HDD) pulling heads: Sizes 2” – 30”
Ø
Large Diameter Manholes & Sumps w/ ladders
